TOOLS FOR FLOORS

kit contains: spring clip, feeder channel, roller pin assembly, foot screws, locknut, spring container screws, spring container, feeder spring, plunger, driving blade, plunger spring, blade retainer 

Powernail model 200 contains the folowing: rubber bumber, 10-32x3/4 shcs gate, 1/4x1/2 dowel pin driving blade, 5/18-18 jam nut driving blade, gate, gate plate, driving blade, rubber cap seal kit 

contains the following parts: (1)spring clip (2)feeder channel (5)roller pin assembly (6br) plunger head (7)plunger spring pin (11br)driving blade(12)plunger sprin (13)foot screws (13n)foot screw nut (13w)foot screw washer (16) spring container screw and 

Overhaul kit includes the follwing: support ring, rubber bumper, plunger seal, plunger seal o-ring, plunger felt wiper seal, return cylinder o-ring gasket, 10-32x3/4" shcs gate, 1/4x1/2 dowel pin driving blade, 5/8-18 jam nut driving blade, plunger, gate, 

seal kit for model 200/445/445sn contains 1 each of all seals 

kit contains rachet spring, gear, gear shaft nut, cotter pin and pawl spring 

Kit contains knob, handle, rachet shaft, rachet spring, gear shaft,gear, gear shaft nut, cotter pin, pawl bushing, pawl pin, pawl #1, pawl#2, pawl spring, plastic screw and red decal 

Kit contains plunger spring, driving blade, and blade retainer 

Kit contains: plunger, plunger spring, driving blade, blade retainer, cotter pin, plunger spring pin, roller pin, gate, gate plate, nail pusher assembly, and 10-32x3/4" shcs gate 

kit contains driving blade, rubber cap, rubber bumper, dowel pin driving blade, jam nut driving blade, seal kit, gate plate, gate, 10-32x3/4 shcs and 10-32x 3/8" shcs gate 

kit contains: support ring, rubber cap, rubber bumper, plunger seal o-ring, plunger seal, plunger felt wiper seal, return cylinder o-ring gasket, nail pusher assembly, driving blade assembly, gate plate, gate, 10-32 x3/4" shcs plunger and 10-32 x 3/8" shc 

kit contains: driving blade, rubber cap, rubber bumber, dowel pin, jam nut, seal kit, rubber bumper, gate plate, gate, 10-32x3/4" shcs plunger and 10-32x3/8 shcs gate 

kit contains: support ring, rubber cap, rubber bumper, plunger seal, plunger seal o-ring, plunger felt wiper seal, return cylinder o-ring gasket, nail pusher assembly, driving blade assembly with rubber seat, rubber bumper, gate plate, gate, 10-32x3/4" sh 

powernail model 200 and 250 adjuster pad and shims 

kit contains: plunger spring, blade retainer and driving blade 

kit contains: plunger, plunger spring, blade retainer, cotter pin, driving blade, plunger spring pin, roller pin, gate, gate plate, nail pusher assembly and 10-32x3/4" shcs gate 

kit contains: rubber bumper, dowel pin drive blade, jam nut drive blde, 10-32x3/4" shcs gate, gate, gate plate, driving blade, rubber cap and seal kit 

kit contains: support ring, rubber bumper, plunger seal set, plunger felt wiper seal, return cylinder o-ring gasket, 10-32 x3/4" schs gate, plunger, gate, gate plate, rubber gap, 10-32x 3/4" shcs plunger, nail pusher assembly and driving blade assembly w/ 

DHC2-4 Duofast This hand carry air compressor is excellent for contractors and homeowners alike. 

Hand carry - compact and lightweight Direct drive motor/pump for efficient operation 

Hand carry-compact and light weight Direct drive motor/pump for efficient operation 

Preferred Seating System Pneumatic Flooring Stapler Designed for use with Porta-Nails' 15 gauge 1/2 crown galvanized staples in sizes 2" and 1-1/2" 

Spotnails pneumatic floor underlayment stapler uses 3/4"-2" 7/16 medium crown 16 gauge staples 

Spotnail stryker shoots 3/16 narrow crown 18 gauge 1/2" to 1 1/4" length staples. 

Spotnail Stiker Hardwood Stapler. Is great for engineered, solid wood and also bamboo!!! 

The Hardwood Flooring Stapler will fire up to 2” inch leg 15 gauge ½” crown staples. 

Model 461 Flooring Stapler: 3/8" & 1/2" Wood/Laminate Flooring Versatile hardwood flooring tongue and groove stapler Precise – drives staples at 45 degree angle every time Lightweight, easy to handle 1/4" crown 1" 18 gauge galvanized staples 

Spotnail stryker floor underlayment stapler shoots 1/4" narrow crown 18 gauge 5/8-1 5/8" staples. Comes with handy carrying case. 

The lightweight SLS20HF tongue-and-groove installation stapler drives 1" to 1-1/8" staples at a perfect 45° angle every time and virtually eliminates tongue splitting and floor surface damage. 

445FS The Model 445 FS has been designed to be used with the new Powernail Powerstaples in 1-1/2", 1-3/4", and 2" sizes for 1/2", 3/4", and 33/32" tongue and groove flooring. 

The Striker hardwood flooring stapler shoots 1 1/2" -2" 15 gauge 1/2" crown staples. Weighs only 10 pounds. 

spotnail striker nails tackstrip to concrete floors. it uses .097 t nails 5/8" to 2 1/2". Comes with plastic carrying case. 

Bullet tools no flip clip keeps your planks from unlocking during installation. 

 

60-1222 floor dot DYI laminate installation kit comes with pull bar and spacers. Reg $19.99 Sale $9.99 

70-100-12 Harmony 3-in-1 underlayment pad dump display contains 12-100 sq ft rolls. 

I-26 #926 Bullet Tools extra wide cutter will accommodate the variety of flooring products you install. Designed for precision cutting of carpet and resilient tiles, the PRO Magnum Shear I-26 also cuts many of the same products as the PRO Magnum Shear I-2 

Call for pricing to low to advertise on this item!!!! 375 Taylor laminate installation kit contains 4 wall spacers, 3 fast strap clamps, 3 vacuum cups, 1 powershunting device and durable carrying case. 

Crain 568 laminate tool kit comes with all the basic tools needed to install laminate floors. 

585 Crain laminate cutter is fast, creates no dust and uses no blades. Also included is the optional plank support. 

Crain laminate cutter 685 Mega Laminate Cutter is a fast and powerful cutter for square end cuts! (This Tool Will Not Cut Diagonal). 

Call for pricing to low to advertise on this item!! The mule is more compact lighter and more maneuverable than other carts and it cost less. 

Provides the "muscle" needed to lift and load rolls of carpet on to a Karpet Kart. 

This nylon tucking tool will not mark or damage walls. Use it around toilets and ceramic tile without fear of breakage. 

Sink concrete nails with a single blow from a standing position. No misses and no damage to walls resulting from misses because the outer tube (sleeve) guides the inner tube or mallet in striking sequence - saves fingers. 

For use under tows spaces and other hard to reach places to drive nails in tackless strip metal molding etc. 

Use to seperate carpet rows to minimize damage to nap and loops. Features a tapered round end for cut pile and flat end for loop pile carpets. Knurled handle for firm gripping area 

One end of this unique tool has a series of blades specially designed for fast easy cleaning of your stretcher and kicker heads including Sharkteeth. The other end traces factory rows on a wide variety of carpet styles. 

Solid die-cast aluminum carpet puller provides a strong grip for "pull ups" or unrolling carpet or sheet goods. The unique mechanical design makes the grip tighter the harder it is pulled. 

Professional carpet cutting circle tool three blades three double faced adhesive circles to hold repaired carpet in place and DIY instructions Simply and neatly cuts out stained or damaged carpeting for replacement.