TOOLS FOR FLOORS

These Extended Float Sticks (1-3/4" to 2-1/2" taper x 36" long) attach to the 1-3/4" end of the Standard Float Sticks. 

This is the Center Ring that is supplied in the No. QPK-101 Quick Pitch Standard Kit to which the Standard Float Sticks (1" to 1-3/4" taper x 36" long) attach. 

Designed primarily for shower wall tile installations, the Stringa-Level Tile Support System is for use on any wall mounted tile installation where tiling begins above the floor. 

Pre-Pitch is a unique, stay in place screeding tool designed for use underneath shower pan liners. 

These Extended Sticks attach to the 7/8" end of the Standard Pre-Pitch Sticks. 

The Kirb-Perfect Shower Curb is a stay-in-place plastic form for building perfect shower curbs. 

The Quick Pitch Float Stick System permits easy construction of shower floors with the proper minimum water drainage slope of 1/4" per 12" run. 

These are the Standard Float Sticks (1" to 1-3/4" taper x 36" long) that are supplied in the No. QPK-101 Quick Pitch Standard Kit, and they attach directly to the Center Ring. 

This 13" long section has four living hinges that conform to curves, inside and outside corners. 

This 27" long section is for straight walls and has a single level vial in the center. 

Designed primarily for shower wall tile installations, the Stringa-Level Tile Support System is for use on any wall mounted tile installation where tiling begins above the floor. 

29-305 TROXELL 6'X50' 30 MIL SHOWER PAN LINER 

31-304 SHOWER PAN LINER SOLVENT